Body material: brassStructure: Direct actionType: Normally cosed Seal Material: NBR,EPDM,VITONPort size: 1/8''Port thread: G,NPT,PTOrifice: 2.2mmTemperature: 0°C to 80 °CMedium: water, gas, ste...
Material: Brass
Pressure: Low Pressure
Temperature of Media: High Temperature
Working Pressure: 0-8bar
Product Name: VG10-02833 3 way brass butterfly handle ball strainer valve Size: 1/2" 3/4" 1" Material: Brass Field of Application: Water Working Pressu...
Material: Brass
Pressure: Low Pressure
Temperature of Media: Normal Temperature
Port Size: 1/2'' 3/4'' 1''
Guanli knife gate valve for industrial service applications.The design of the body and seat assures non-clogging shutoff on suspended solids in industries Such as:*Pulp and Paper*Power plants*Chemical plants*Wastewater*Food and Be...
Material: CF8M/CF8
Knife: SS304/SS316
Standard: EN1092/ANSI/JIS 10K/AS4087
Size range: DN50-DN900
Voltage: 220V/380VFeature: High EfficiencyWarranty: 1 YearTheory: Centrifugal PumpStandard or Nonstandard: StandardPackaging Details: STRONG CARTON PACKING WITH EXPORT STANDARDPort: NI...
Structure: Multistage Pump
Usage: Water
Application: Submersible
Power: Electric
Pump InstalLation And AppLicationsIt can be used to transfer clean water or other liquid similar to water in physical and chemical properties. It is suitable for small living water supply, automatic water sprinkler system, small air...
Shaft: Stainless steel welded shafti45# steel
Insulation class: B or F
Protection class: IPX4
Max. Ambient temperature: +40t
Air Release Valves are used to release the air that are formed in pipelines. Steady air release can avoid pressure surge and protect pipe lines from damaging. The Air Release Valve can release air when pipes are filled with water, a...
Application: Water Industrial Usage, Industrial Usage
Pressure: Pn1.0 ~ 2.5MPa
Temperature of Media: -10~120℃
Structure: Air Release
NB Series high efficiency and energy saving sand suction pump is single stage and single suction horizontal centrifugal pump, which is widely used to pump the mud with sand grains at the bottom of rivers and lakes, sludge and impurities ...
Flow rate: 2-400m3/h
Head: 3-30m
Pump material: cast iron or stainless steel
centrifugal pump: slurry pump
1W single-stage vortex pump is used to pump clear water and other liquids similar to water in physical and chemical properties .The liquid temperature shall not exceed 80 degree Celsius.1W Single stage vortex pump is often used in boil...
Flow rate: 2-50m3/h
Head: 2-120m
pump material: cast iron or stainless steel
vortex pump: transfer pump
LWB vortex pump is a new type sewage pump with low wear, no winding and no clogging. The pump design is unique. The impeller is not located in the center of the pump chamber. The conveyed medium does not go through the impeller, direc...
Flow rate: 5-50m3/h
Head: 5-12m
pump material: cast iron or stainless steel
vortex pump: sewage pump
IS,IH Single stage back pull-out end suction centrifugal pumpHorizontal single stage end suction back pull out Centrifugal PumpIS & IH Type Centrifugal Pump is a horizontal single-stage single suction (axial suction) cant...
Flow rate: 2-1200m3/h
Head: 3-125m
pump material: cast iron or stainless steel
centrifugal pump: chemical pump
CWF Series sewage cutting pump is centrifugal sewage discharge pump with open impeller. The pump can crush the soft dirt into the domestic sewage and discharge them. The sewage fluid is lower than 85 degree Celsius. The maximum diam...
Flow rate: 5-30m3/h
Head: 3-30m
centrifugal pump: sewage pump
drainage pump: wastewater pump
LW Vertical not-clogging sewage pump is used to transfer the waste water with fiber diameter 5 times as pump diameter or the solid particles diameter 50% as the pump diameter. LW vertical not-clogging sewage pump adopts a unique single...
Flow rate: 5-3600m3/h
Head: 5-60m
pump material: cast iron or stainless steel
vertical pump: inline pipeline pump
Pump introduction:QYB type gas liquid mixing pump (also known as air float pump, dissolved air pump) is a horizontal installation of self priming gas liquid mixing pump. All parts of the QYB pump are made of stainless steel.Gas liq...
Flow rate: 3-50m3/h
Head: 10-150m
Pump material: stainless steel
centrifugal pump: vortex pump
ZS Self priming centrifugal pump with vacuum suction device.ZS Self priming sewage pump with vacuum suction diviceThe self priming pump can be driven by motor or diesel engineSelf priming centrifugal pump with vacuum suction deviceT...
Flow rate: 80-2200m3/h
Head: 10-80m
Pump material: cast iron or stainless steel
centrifugal pump: self priming pump
1. No suction device and no filling water or infusing water. The pump adopts diaphragm vacuum pump to suck the air inside the pipeline and the water into pipeline automatically is sucked to the impeller...
Flow rate: 2-450m3/h
Head: 3-150m
pump material: cast iron or stainless steel
centrifugal pump: self priming pump
Submersible sewage pump 220V,50HZ Single phase or three phase motorVortex impeller able to handle solids efficiently. Designed for transferring and discharge sewage.1. Power Cable: Standard cord is 10m2. Liquid Temperature: 104 ...
Flow rate: 9m3/h
Head: 7m
motor: 220V,50HZ,1.1kw
centrifugal pump: transfer pump
QDN domestic submersible pump is developed and produced by our company. QDN Stainless steel domestic submersible pump is made of 304, 306 and 316L stainless steel with Wear and corrosion resistant mechanical seals. QDN stainless...
Flow rate: 0-6m3/h
Head: 1-80m
pump material: SS304, SS316,SS316L
submersible pump: stainless steel pump
QZB axial flow submersible pump and QHB mixed flow pump are the developed electric pump unit. They have some advantages than other electric pumps.As the motor and water pump consist of a whole and installation is convenient an...
Flow rate: 350-15000m3/h
Head: 1-10m
pump material: cast iron
submersible pump: axial flow pump
QG,QGD Submersible screw pump consists of three parts (pump group, seal and motor). Pump group is located in the upper parts of the electric pump. The main parts for pump group is screw and rubber stator. The motor is located in th...
Flow rate: 1-5m3/h
Head: 5-100m
pump material: stainless steel
screw pump: transfer pump
LC Vertical long shaft submerged pump is developed and improved on the base of common submerged pump. LC Vertical long shaft submerged pump is used to transfer the clear water, rainwater, iron oxide water, sewage, corrosive liquids su...
Flow rate: 50-8400m3/h
Head: 15-150m
pump material: cast iron or stainless steel
centrifugal pump: multistage pump
ZLB Series vertical axial flow pump is the single stage vertical axial flow pump. The pump is suitable to pump clean water, sewage ,rainwater or slightly corrosive liquids. The pumped liquids temperature is not higher than 50 degree C...
Flow rate: 1000-12000m3/h
Head: 2-7m
pump material: cast iron or stainless steel
axial flow pump: transfer pump
HW introduction:HW Series horizontal mixed flow pumps are horizontal, single stage, single suction, volute mixed-flow pumps. The pumps are designed to handle clear water or any other similar liquids.HW Series horizontal mixed flow ...
Flow rate: 70-8000m3/h
Head: 3-20m
pump material: cast iron or stainless steel
mixed flow pump: volute pump
QW,LW,GW,WQ Series submersible not-clogging sewage pumpSummary:Submersible type and pipeline type and vertical type etc not-clogging sewage pump is the new ones with energy-saving and high effiiciency. The pumps adopt the impell...
pump inlet/outlet: DN25-DN600
Pump material: cast iron or stainless steel
Flow rate: 2-600m3/h
Head: 2-60m